Sweatshirt is the most suitable item for autumn and winter because it looks casual and fashionable. Autumn and winter are also the best seasons to buy sweatshirts. When we develop sweatshirts, in addition to paying attention to the style of the clothes, we must also pay attention to the quality of the clothes. Learn this knowledge and earn more repeat customers and good reputation!

Let’s first learn about sweatshirt fabric

Sweatshirt cloth

Sweatshirt fabric is a kind of knitted fabric, called French in English
terry,
After pulling the hair, it is called fleece. This type of knitted fabric is mostly made of displacement yarn, so it is called displacement fabric or sweatshirt fabric. In some places it is called terry cloth, and in other places it is called fish scale cloth. There are many varieties. (Fish scale cloth is named because the back of the cloth is terry cloth, and some of them look like fish scales.) The weight is generally 190g/M2 -350g/M2.

Can be divided into:

1. Generally, those weighing less than 250g are called small sweatshirts in the market, and some people call them sweatshirts. , and some people call it a single sweatshirt. Because it is woven from a single yarn, it is relatively thin compared to this type. The loops of the small sweatshirt are smaller, called small terry cloth

2. More than 280g Yes, it is called a big sweatshirt in the market, and some people call it a double sweatshirt. Because it is woven from two or even three yarns, this kind of cloth is relatively thick. The loops of the David’s coat are obviously larger, so people call them big loops.

On the terry surface on the back side, you can also scratch the hair. When it comes to brushing, some people say it’s called painting, and it’s also called pulling, which means the same thing. It’s called differently in different places. This kind of fleece fleece will be thicker and warmer than the original terry cloth without fleece. This kind of cloth is generally around 280g-320g.

Can be divided into:

1. Cotton (100% cotton)

2. CVC (cotton-polyester, containing more than 60% cotton)

3. TC/AB (containing about 30% cotton)

4. Full polyester (100% polyester)

If they are made of the above four ingredients, then these sweatshirts are not stretchy. Stretchy sweatshirts are made with spandex, that is, pure cotton, CVC, TC/AB, and pure polyester are basically made with spandex added (market name: stretch/densified). After adding this, the fabric of the sweatshirt becomes elastic. , the spandex component generally accounts for 5% of the entire cloth.

Sweatshirt with spandex/terry cloth/fish scale Cloth can be divided into

1. Cotton stretch sweatshirt /terry cloth/fish scale cloth

2.CVC elastic pull-up sweatshirt/terry Cloth/fish scale cloth

3.TC/AB stretch stretch sweatshirt/terry cloth /Fish scale cloth

4. Full polyester stretch pull-up sweatshirt/terry cloth/fish scale cloth

But pilling of sweatshirts is a very annoying problem, after all When clothing pills, it will look cheap and downgraded. And wearing it can also cause a bad mood.

I believe that we should have encountered this situation in our daily lives. Pass.

Why clothes?Will it pill?

There are three main reasons for fabric pilling ：

1. Pilling due to fabric properties.

Different fabrics have different pilling difficulties. Similarly, fiber properties have a great influence on fabric pilling. Fiber length, fineness, shape and surface properties also have a great relationship with fabric pilling. In contrast, fine fibers are easier to pill than coarse fibers, and blended fibers are easier to pill than other fibers.

2. Friction and static electricity pilling.

Some chemical fibers have poor hygroscopicity. Static electricity is easily generated during the process, and static electricity causes the hairiness on the surface of the short fiber fabric to stand upright, thus creating conditions for pilling. For example, the static electricity of polyester can easily attract foreign particles and cause pilling.

3. Improper pilling during washing.

Washing for too long can easily cause fabric fiber damage and fiber damage. Broken ends increase the possibility of pilling; the washing temperature is too high (suitable temperature is 20 to 45 degrees), the wrong detergent (neutral detergent is recommended), etc. may cause pilling.

The necessary condition for pilling is that the fiber must be strong enough Support until pilling, like cotton and fine wool, will break and fall off during the fluffing stage, and there is little chance of pilling. The situation is different for chemical fibers. Polyester or acrylic are very stubborn. They will fluff first, then pill, and then you have to cut off the pills. Pilling of clothes is affected by the characteristics of the fabric and cannot be avoided, but the degree can be controlled. Fine fibers are easier to pill than coarse fibers, and blended fibers are easier to pill than other fibers. For example, a garment made of a blend of chemical fiber and cotton fiber is more likely to pill than a pure cotton garment.

Solution

The fundamental solution is to buy sweatshirts When choosing fabrics, choose clothes that are not prone to pilling, such as clothes made of natural fiber fabrics, such as pure cotton, silk, cashmere, etc. Pure natural wool is the best, but it will be more expensive and has higher warmth and softness.

Pure cotton sweatshirts feel better and the texture looks better. It is comfortable to wear, very soft, and also very sweat-absorbent.

These sweatshirt cleaning and maintenance tips

also Remember to remind customers~

Normal cleaning:

The washing water temperature should not be higher than 25 degrees. It is best to wash with cold water and must be washed by hand. Try to use neutral detergent for cleaning. If you find it difficult to remove residues of detergent, you can put some vinegar in the water, so that you can easily remove stains. When washing, do not scrub the collar and cuffs too vigorously to avoid deformation of the collar and cuffs.

Print cleaning:

Print items should not be soaked in water for too long. Do not rub the surface of the sweatshirt pattern with your hands. Do not wash it with detergent containing bleach. Try to use a more neutral detergent for cleaning. All printed items should not be washed in a washing machine as much as possible. It is recommended to wash them by hand. If the printed pattern on the clothing is stained, please soak it in washing powder and water for a few minutes, and then clean it with a brush (soft-bristled brush is best). It is not advisable to brush hard to avoid damaging the fabric fibers and affecting the brilliance of the printed pattern. Printed objects cannot come into contact with solvents, acids, alkali, oil and other corrosive substances.

Drying method:

1. After washing, the clothes should be dried naturally, just squeeze the water gently with your hands. Do not wring it with your hands, do not spin it in a clothes dryer, and printed items should not be bleached or dried.

2. If the clothes need to be ironed, you can use medium-temperature steam ironing after drying. Iron, keeping the iron away from the pattern as much as possible. If the pattern needs to be ironed, the temperature of the iron should not be higher than 80 degrees. Please do not place the iron directly on the pattern. It is best to block a piece of cloth in the middle before ironing.

Collection skills:

1. When putting away clothes after washing, do not stuff the clothes into a narrow space. Hang them on hangers or spread them flat to keep the clothes in a smooth shape.

2. It is best to use hangers to hang them in the closet, or fold the clothes. OK, put it in the cabinet.

Spin dry. Printed items should not be bleached or dried.

Collection skills:

1. When putting away clothes after washing, do not stuff the clothes into a narrow space. Hang them on hangers or spread them flat to keep the clothes in a smooth shape.

2. It is best to use hangers to hang them in the closet, or fold the clothes. OK, put it in the cabinet.