Silk linen blend wet weaving fabric technology design



Silk and linen blended wet weaving fabric technology design 1. Requirements for pretreatment technical measures (1) Mixing ratio of the two fibers: The rationality of the mixing ra…

Silk and linen blended wet weaving fabric technology design

1. Requirements for pretreatment technical measures (1) Mixing ratio of the two fibers: The rationality of the mixing ratio of silk and flax is very important. The silk content is small, the elasticity and colorability of the linen fabric are not improved significantly, and the silk content is too high. It will greatly increase the cost of spinning, and the style of linen products will not be outstanding. The blended chemical fiber fabric ratio of silk and flax fibers is 45/55, and the wearing performance of the finished product is improved. (2) Pretreatment of silk: Tussah silk contains a certain amount of sericin and oil. Before putting it on the machine, put the silk ball in the humidification room for 48 hours to make the silk fiber reach a certain moisture regain, which can reduce the phenomenon of drawing rollers. . Generally, the relative humidity in a workshop is about 80%, and the moisture regain rate of silk strips is 16%-18%.
AAAKY, 7II56U65

Extendedreading:https://www.china-fire-retardant.com/post/9396.html
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedread

This article is from the Internet, does not represent 【www.garmentmanufacture.com】 position, reproduced please specify the source.https://www.garmentmanufacture.com/archives/15451

Author: clsrich

 
TOP
Home
News
Product
Application
Search