OLPS air-jet loom
OLPS300 air-jet loom is a new shuttleless loom developed by Zhejiang Titan Co., Ltd. The machine uses a finishing center and an imported CNC convex grinder to make the main parts; the electrical appliances are highly integrated and use world-famous solenoid valves. It has a high degree of automation, coordinated movements, precision and good stability.
The OLPS300 air-jet loom has the advantages of advanced design, stable technology, wide application range, high speed and high efficiency, clear detection, simple and convenient operation and maintenance. It can be widely used in work clothes fabrics and decorative materials made of cotton, filament, wool and other raw materials. Weaving of cloth and industrial fabrics.
Applicable spinning yarn range: short fiber: 5.83～116.62tex; filament: 3.3～33tex
Under the joint action of the main nozzle, auxiliary nozzle and special-shaped steel reed, the weft insertion mechanism uses the high-speed airflow generated by the release of compressed air to pull the weft yarn through the fabric fell to complete the weft insertion.
Beat-up mechanism: Bilateral four-link beat-up mechanism.
The let-off mechanism adopts a servo system to realize automatic continuous positive electronic let-off.
The coiling mechanism is mechanically continuous coiling, and the required weft density is achieved by changing gears.
Length measurement and weft storage Electronic drum storage, drum diameter and yarn stop pin fixed length.
Transmission and braking Super start motor transmission and electromagnetic brake braking.
The weft stop device detects the weft yarn information by a reflective electric weft finder, and issues a stop or continuous operation instruction through the FU203 weft finder board control.
Lubrication method: The main transmission components adopt oil bath lubrication, and other components adopt oil cup lubrication and centralized oil supply.
Stopping device Electrical contact stopping device.
Display Keyboard display (parameter setting, loom status monitoring, self-diagnosis of faults); multi-color indicator lights indicate warp stop, weft stop, waiting and other information.
The control system uses a microcomputer as the control core to control loom operations such as weft insertion, weft selection, warp let-off and weft storage respectively.
Set the weaving process parameters (warp tension, color, solenoid valve opening and closing time, etc.) on the keyboard. Each control unit controls the corresponding action. There is an operation button board on the left and right sides of the front of the car to facilitate the operator’s operation.
AAAZXCASFWEFERH
Extendedreading:https://www.tpu-ptfe.com/post/7718.html
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedread
