Enterprises adopting neat and uniform professional attire can improve employees’ sense of belonging and honor to the enterprise, change their mental outlook, and promote work efficiency. When designing, the scope, nature and characteristics of the work should be strictly distinguished, and the attire should be consistent with the attire of different positions. Customized professional attire is different from work clothes. Customized work clothes are generally made in large quantities and have uniform sizes, while professional attire needs to be customized and made according to one’s own needs and hobbies. It is more beautiful and beautiful than ordinary work clothes, but customized professional attire is There are certain requirements, such as fabrics, fine needles and other factors. During the entire production process, you must also pay attention to details. The editor will answer them in detail below.
Requirements for customization of professional attire
1. The fabric of professional attire itself has a great influence on the sewing situation.
For example, when the sewing direction is parallel to the warp direction of some fine-structured workwear fabrics, finished fabrics, thin and non-stretchable workwear fabrics, the embedded The stitches will force the warp yarns away from the original position, because each stitch will push the warp yarns apart. The deflection caused by the accumulation of multiple stitches will shrink along the seam body, causing the sewing to wrinkle. When the sewing direction These workwear fabrics generally tend to wrinkle less when parallel to the weft direction.
According to experience, diagonal seams in the diagonal direction will not wrinkle. For most professional clothing fabrics, as long as the seams are at a diagonal angle of 15 degrees in longitude or latitude, they will be wrinkle-free. Enough to prevent wrinkling.
2. Use fine needles as much as possible.
Because fine needles can significantly reduce the resistance generated when passing through the fabric of professional clothing, it has the effect of preventing shrinkage and wrinkles. At the same time, pay attention to changing new needles frequently. When using synthetic sewing thread, care must be taken to determine the tension of the suture and adjust the tension to .
Bottom thread tension must be adjusted to: when the freely moving end of the suture is pulled up, the bobbin bobbin shaft and jacket slowly slide downward, and the tension of the upper thread and bottom thread must be kept consistent so that they are exactly at both ends. Stagger between layers of workwear fabric. Synthetic sewing threads sewn into workwear fabrics with too much tension will automatically shrink to relieve the tension. This phenomenon will cause the fabric body to shrink along the seams, causing the seams to wrinkle.
3. It should be noted that the friction between the upper layer of workwear fabric and the presser foot will also force the lower layer of workwear fabric on the feed dog to move faster, causing seams to wrinkle. .
Just lower the pressure of the presser foot as much as possible, use fine-threaded feed dogs (conveyors), and reduce the rotation speed of the sewing machine to prevent wrinkles caused by feeding and completely solve this problem. The basic solution to this problem is to use a sewing machine with a differential feed or needle feed mechanism. How to reduce shrinkage and wrinkling of fabrics during sewing.
Details that need to be paid attention to in the process of customizing professional attire
1. Jacket length
This is an area that many people ignore, but this is also an important factor in customizing professional attire. It’s more important because it will affect the proportions of your body shape! When you wear clothes that are too long or too short, it will affect your overall image. For example, if you wear a coat that is too long, you will appear shorter than someone who is well-proportioned.
2. Jacket sleeve length
As for the sleeve length, this will be determined due to differences in clothing fabrics, types and personal preferences. Under normal circumstances, taking a suit as an example, the suit sleeves should be 2 to 5 centimeters below the wrist. If it is a windbreaker, it will generally be slightly longer, and the length will appear visually different depending on the clothes worn underneath.
3. Shoulder line
In fact, the shoulder line is the “soul” of a piece of clothing. I wonder if you all agree with Muzi’s statement? The shoulder line of a well-fitting jacket is flat. The shoulder seam line of the suit jacket should fall on the outside of your shoulder, not above your shoulder or down your arm. There should be no wrinkles in any fabric. The shoulders are one of the most difficult areas to modify in any jacket, so choosing a well-fitting jacket at the beginning will save you a lot of trouble.
4. Don’t “X” wrinkles
Clothes are like our “face”. When you wear wrinkled clothes and clean clothes, it gives people a good impression The impression is just different.
The professional attire customization requirements and customization details introduced above are shared with you.
